Customer-Vlans - Juniper JUNOS OS 10.4 - FOR EX REV 1 Manual

Complete Software Guide for Junos

customer-vlans

Syntax
Hierarchy Level
Release Information
Description
Options
Required Privilege
Level
Related
Documentation
1652
®
OS for EX Series Ethernet Switches, Release 10.4
customer-vlans (id | native | range);
[edit vlans vlan-name dot1q-tunneling]
Statement introduced in Junos OS Release 9.3 for EX Series switches.
Option introduced in Junos OS Release 9.6 for EX Series switches.
native
Limit the set of accepted C-VLAN tags to a range or to discrete values.
—Numeric identifier for a VLAN.
id
—Accepts untagged and priority-tagged packets from access interfaces and assigns
native
the configured S-VLAN to the packet.
—Range of numeric identifiers for VLANs.
range
system—To view this statement in the configuration.
system-control—To add this statement to the configuration.
dot1q-tunneling on page 1655
ether-type on page 1658
Example: Setting Up Q-in-Q Tunneling on EX Series Switches on page 1568
Configuring Q-in-Q Tunneling (CLI Procedure) on page 1608
Understanding Q-in-Q Tunneling on EX Series Switches on page 1514
Copyright © 2010, Juniper Networks, Inc.