Clear Bgp Table - Juniper JUNOS OS 10.4 - FOR EX REV 1 Manual

clear bgp table

Syntax
Syntax (EX Series
Switch)
Release Information
Description
Options
Additional Information
Required Privilege
Level
List of Sample Output
Output Fields
clear bgp table clear bgp table
private.inet.0 private.inet.0
Copyright © 2010, Juniper Networks, Inc.
clear bgp table table-name
<logical-system (all | logical-system-name)>
clear bgp table table-name
Command introduced in Junos OS Release 9.0.
Command introduced in Junos OS Release 9.0 for EX Series switches.
Request BGP to refresh routes in a specified routing table.
logical-system (all | logical-system-name)
systems or on a particular logical system.
table-name —Request that BGP refresh routes in the specified table.
In some cases, a prefix limit is associated with a routing table for a VPN instance. When
this limit is exceeded (for example, because of a network misconfiguration), some routes
might not be inserted in the table. Such routes need to be added to the table after the
network issue is resolved. Use the
routes in a VPN instance table.
clear
clear bgp table private.inet.0 on page 2249
This command produces no output.
user@host> clear bgp table private.inet.0
Chapter 80: Operational Commands for Layer 3 Protocols
—(Optional) Perform this operation on all logical
clear bgp table command to request that BGP refresh
2249