Qualified-Next-Hop - Juniper JUNOS OS 10.4 - FOR EX REV 1 Manual

qualified-next-hop

Syntax
Hierarchy Level
Release Information
Description
Options
Required Privilege
Level
Related
Documentation
Copyright © 2010, Juniper Networks, Inc.
qualified-next-hop (address | interface-name) {
interface interface-name;
metric metric;
preference preference;
}
[edit logical-systems logical-system-name routing-instances routing-instance-name
routing-options static route destination-prefix],
[edit logical-systems logical-system-name routing-options rib inet6.0 static route
destination-prefix],
[edit logical-systems logical-system-name routing-options static route destination-prefix],
[edit routing-instances routing-instance-name routing-options static route destination-prefix],
[edit routing-options rib inet6.0 static route destination-prefix],
[edit routing-options static route destination-prefix]
Statement introduced before Junos OS Release 7.4.
Statement introduced in Junos OS Release 9.0 for EX Series switches.
Configure an independent metric or preference on a static route.
address —IPv4, IPv6, or ISO network address of the next hop.
—Name of the interface on which to configure an independent metric or
interface-name
preference for a static route. To configure an unnumbered Ethernet interface as the
next-hop interface for a static route, specify
is the name of the IPv4 or IPv6 unnumbered Ethernet interface.
interface-name
metric —Metric value.
Range: 0 through 4,294,967,295 (2
—Preference value. A lower number indicates a more preferred route.
preference
Range: 0 through 4,294,967,295 (2
Default: 5
routing—To view this statement in the configuration.
routing-control—To add this statement to the configuration.
Configuring an Independent Preference for Static Routes
Chapter 79: Configuration Statements for Layer 3 Protocols
qualified-next-hop interface-name
32
– 1)
32
– 1)
, where
2157