Juniper JUNOS OS 10.4 - FOR EX REV 1 Manual page 1666

Complete Software Guide for Junos
Action
Meaning
Purpose
Action
Meaning
Purpose
Action
Meaning
Purpose
1562
®
OS for EX Series Ethernet Switches, Release 10.4
List Ethernet switching interfaces on the switch, using the
command:
interfaces
user@Access-Switch-A> show ethernet-switching interfaces
Interface State VLAN members
ge-0/0/1.0 up finance
ge-0/0/2.0 up lab
ge-0/0/3.0 up sales
xe-0/1/1.0 up finance
lab
GVRP has automatically added
because they are being advertised by Access Switch B.
Verifying That GVRP Is Enabled on Access Switch B
Verify that GVRP is enabled on the switch.
Show the GVRP configuration:
user@Access-Switch-B> show gvrp
Global GVRP configuration
GVRP status : Enabled
GVRP Timers (ms)
Join : 200
Leave : 600
LeaveAll : 10000
Interface Name Protocol Status
-------------- ---------------
xe-0/1/0.0 Enabled
The results show that GVRP is enabled on the trunk interface of Switch B and that the
default timers are used.
Verifying That GVRP Is Updating VLAN Membership on Switch B
To verify that GVRP is updating VLAN membership, display the Ethernet switching
interfaces and associated VLANs that are active on switch B:
List Ethernet switching interfaces on the switch:
user@Access-Switch-B> show ethernet-switching interfaces
Interface State VLAN members
ge-0/0/0.0 up finance
ge-0/0/1.0 up lab
xe-0/1/1.0 up finance
lab
sales
GVRP has automatically added
interface because they are being advertised by Access Switch A.
Verifying That GVRP Is Enabled on the Distribution Switch
Verify that GVRP is enabled on the switch.
Blocking
unblocked
unblocked
unblocked
unblocked
unblocked
finance and lab as VLAN members on the trunk interface,
Blocking
unblocked
unblocked
unblocked
unblocked
unblocked
, , and as VLAN members on the trunk
finance lab sales
Copyright © 2010, Juniper Networks, Inc.
show ethernet-switching