Show Route Extensive; Table 328: Show Route Extensive Output Fields - Juniper JUNOS OS 10.4 - FOR EX REV 1 Manual

Complete Software Guide for Junos

show route extensive

Syntax
Syntax (EX Series
Switch)
Release Information
Description
Options
Required Privilege
Level
List of Sample Output
Output Fields

Table 328: show route extensive Output Fields

Field Name Field Description
routing-table-name Name of the routing table (for example,
number destinations Number of destinations for which there are routes in the routing table.
Number of routes in the routing table and total number of routes in the following states:
number routes
2440
®
OS for EX Series Ethernet Switches, Release 10.4
show route extensive
<destination-prefix>
<logical-system (all | logical-system-name)>
show route extensive
<destination-prefix>
Command introduced before Junos OS Release 7.4.
Command introduced in Junos OS Release 9.0 for EX Series switches.
Display extensive information about the active entries in the routing tables.
—Display all active entries in the routing table.
none
destination-prefix —(Optional) Display active entries for the specified address or range of
addresses.
logical-system (all | logical-system-name)
systems or on a particular logical system.
view
show route extensive on page 2445
show route extensive (Access Route) on page 2451
show route extensive (Route Reflector) on page 2451
Table 328 on page 2440 describes the output fields for the
Output fields are listed in the approximate order in which they appear.
active (routes that are active).
holddown (routes that are in the pending state before being declared inactive).
(routes that are not used because of a routing policy).
hidden
—(Optional) Perform this operation on all logical
show route extensive
inet.0 ).
Copyright © 2010, Juniper Networks, Inc.
command.