Asm-Override-Ssm - Juniper JUNOS OS 10.4 - FOR EX REV 1 Manual

Required Privilege
Level
Related
Documentation

asm-override-ssm

Syntax
Hierarchy Level
Release Information
Description
Required Privilege
Level
Related
Documentation
Copyright © 2010, Juniper Networks, Inc.
subsequent number represents an AS that is progressively farther from the local AS,
heading toward the origin of the path. You cannot specify a regular expression for
; you must use a full, valid AS path.
as-path
atomic-aggregate —(Optional) Attach the BGP
aggregate route. This path attribute indicates that the local system selected a less
specific route instead of a more specific route.
—(Optional) BGP origin attribute that indicates that the path information
origin egp
originated in another AS.
—(Optional) BGP origin attribute that indicates that the path information
origin igp
originated within the local AS.
origin incomplete —(Optional) BGP origin attribute that indicates that the path information
was learned by some other means.
routing—To view this statement in the configuration.
routing-control—To add this statement to the configuration.
Configuring Static Routes
Configuring Aggregate Routes
Configuring Generated Routes
Understanding a 4-Byte Capable Router AS Path Through a 2-Byte Capable Domain
in the Using 4-Byte Autonomous System Numbers in BGP Networks Technology Overview
asm-override-ssm;
[edit logical-systems logical-system-name routing-instances routing-instance-name
routing-options multicast],
[edit logical-systems logical-system-name routing-options multicast],
[edit routing-instances routing-instance-name routing-options multicast],
[edit routing-options multicast]
Statement introduced in Junos OS Release 9.4.
Statement introduced in Junos OS Release 9.5 for EX Series switches.
Enable the routing device to accept any-source multicast join messages (* ,G) for group
addresses that are within the default or configured range of source-specific multicast
groups.
routing—To view this statement in the configuration.
routing-control—To add this statement to the configuration.
Example: Configuring Source-Specific Multicast Groups with Any-Source Override
Chapter 79: Configuration Statements for Layer 3 Protocols
atomic-aggregate path attribute to the
1957