Multicast - Juniper JUNOS OS 10.4 - FOR EX REV 1 Manual

multicast

Syntax
Hierarchy Level
Release Information
Description
Required Privilege
Level
Related
Documentation
Copyright © 2010, Juniper Networks, Inc.
multicast {
forwarding-cache {
threshold suppress value <reuse value>;
}
interface interface-name {
enable;
}
scope scope-name {
interface [ interface-names ];
prefix destination-prefix;
}
ssm-groups {
address;
}
}
[edit logical-systems logical-system-name routing-instances routing-instance-name
routing-options],
[edit logical-systems logical-system-name routing-options],
[edit routing-instances routing-instance-name routing-options],
[edit routing-options]
Statement introduced before Junos OS Release 7.4.
Statement introduced in Junos OS Release 9.0 for EX Series switches.
Configure generic multicast properties.
NOTE: You cannot apply a scoping policy to a specific routing instance. All
scoping policies are applied to all routing instances. However, you can apply
the statement to a specific routing instance.
scope
The remaining statements are explained separately.
routing—To view this statement in the configuration.
routing-control—To add this statement to the configuration.
(indirect-next-hop on page 2056 | no-indirect-next-hop)
Configuring Multicast Scoping
Configuring Additional Source-Specific Multicast Groups
Junos Multicast Configuration Guide
Chapter 79: Configuration Statements for Layer 3 Protocols
2105