Retain - Juniper JUNOS OS 10.4 - FOR EX REV 1 Manual

Complete Software Guide for Junos

retain

Syntax
Hierarchy Level
Release Information
Description
Default
Required Privilege
Level
Related
Documentation
2170
®
OS for EX Series Ethernet Switches, Release 10.4
(retain | no-retain);
[edit logical-systems logical-system-name routing-instances routing-instance-name
routing-options rib routing-table-name static (defaults | route)],
[edit logical-systems logical-system-name routing-instances routing-instance-name
routing-options static (defaults | route)],
[edit logical-systems logical-system-name routing-options rib routing-table-name static
(defaults | route)],
[edit logical-systems logical-system-name routing-options static (defaults | route)],
[edit routing-instances routing-instance-name routing-options rib routing-table-name static
(defaults | route)],
[edit routing-instances routing-instance-name routing-options static (defaults | route)],
[edit routing-options rib routing-table-name static (defaults | route)],
[edit routing-options static (defaults | route)]
Statement introduced before Junos OS Release 7.4.
Statement introduced in Junos OS Release 9.0 for EX Series switches.
Configure statically configured routes to be deleted from or retained in the forwarding
table when the routing protocol process shuts down normally:
retain —Have a static route remain in the forwarding table when the routing protocol
process shuts down normally. Doing this greatly reduces the time required to restart
a system that has a large number of routes in its routing table.
—Delete statically configured routes from the forwarding table when the
no-retain
routing protocol process shuts down normally.
no-retain
routing—To view this statement in the configuration.
routing-control—To add this statement to the configuration.
static on page 2197
Configuring Static Routes
Copyright © 2010, Juniper Networks, Inc.