Table 278: Policies Global Configuration Parameters - Juniper JUNOS OS 10.4 - FOR EX REV 1 Manual

Table 278: Policies Global Configuration Parameters

Field Function
Prefix List Specifies a list of IPv4 address
prefixes for use in a routing policy
statement.
BGP Specifies a BGP community.
Community
AS Path Specifies an AS path. This is
applicable to BGP only.
Copyright © 2010, Juniper Networks, Inc.
—Edits an existing policy. To modify an existing term, enter information into the
Edit
configuration page as described in Table 279 on page 1926.
Term Up —Moves a term up in the list.
—Moves a term down in the list.
Term Down
Delete —Deletes the selected policy.
—Tests the policy. Use this option to check whether the policy produces
Test Policy
the results that you expect.
Your Action
To add a prefix list:
1. Click
Add
2. Enter a name for the prefix list.
3. To add an IP address, click
4. Enter the IP address and the subnet mask and click
5. Click OK
To edit a prefix list, click
To delete a prefix list, select it and click
To add a BGP community:
1. Click
Add
2. Enter a name for the community.
3. To add a community, click
4. Enter the community ID and click
5. Click OK
To edit a BGP community, click
To delete a BGP community, select it and click
To add an AS path:
1. Click
Add
2. Enter the AS path name.
3. Enter the regular expression and click
4. Click OK
To edit an AS path, click
To delete an AS path, select it and click
Chapter 77: Configuring Layer 3 Protocols
.
.
Add
.
Edit . Edit the settings and click
Delete
.
.
Add
OK .
.
Edit . Edit the settings and click
.
.
Edit . Edit the settings and click
Delete
.
OK
OK .
.
OK .
.
Delete
.
OK
OK .
.
1925