Show Route All - Juniper JUNOS OS 10.4 - FOR EX REV 1 Manual

show route all

Syntax
Syntax (EX Series
Switch)
Release Information
Description
Options
Required Privilege
Level
List of Sample Output
Output Fields
show route all show route all
Copyright © 2010, Juniper Networks, Inc.
show route all
<logical-system (all | logical-system-name)>
show route all
Command introduced before Junos OS Release 7.4.
Command introduced in Junos OS Release 9.0 for EX Series switches.
Display information about all routes in all routing tables, including private, or internal,
tables.
—Display information about all routes in all routing tables, including private, or
none
internal, tables.
logical-system (all | logical-system-name)
systems or on a particular logical system.
view
show route all on page 2401
In Junos OS Release 9.5 and later, only the output fields for the
display all routing tables, including private, or hidden, routing tables. The output field
table of the show route command does not display entries for private, or hidden, routing
tables in Junos OS Release 9.5 and later.
The following example displays a snippet of output from the
then displays the same snippet of output from the
user@host> show route
mpls.0: 7 destinations, 7 routes (5 active, 0 holddown, 2 hidden)
Restart Complete
+ = Active Route, - = Last Active, * = Both
0 *[MPLS/0] 2d 02:24:39, metric 1
Receive
1 *[MPLS/0] 2d 02:24:39, metric 1
Receive
2 *[MPLS/0] 2d 02:24:39, metric 1
Receive
800017 *[VPLS/7] 1d 14:00:16
> via vt-3/2/0.32769, Pop
800018 *[VPLS/7] 1d 14:00:26
> via vt-3/2/0.32772, Pop
user@host> show route all
mpls.0: 7 destinations, 7 routes (5 active, 0 holddown, 2 hidden)
Restart Complete
+ = Active Route, - = Last Active, * = Both
0 *[MPLS/0] 2d 02:19:12, metric 1
Receive
1 *[MPLS/0] 2d 02:19:12, metric 1
Chapter 80: Operational Commands for Layer 3 Protocols
—(Optional) Perform this operation on all logical
show route all
show route
command:
show route all
command
command and
2401