Juniper JUNOS OS 10.4 - FOR EX REV 1 Manual page 2086

Complete Software Guide for Junos
Options
1982
®
OS for EX Series Ethernet Switches, Release 10.4
authentication algorithm algorithm-name
the specified BFD session:
meticulous-keyed-md5
authentication key-chain key-chain-name
BFD session using the name of the security keychain. The name you specify must
match one of the keychains configured in the
statement at the
[edit security]
authentication loose-check
BFD session. Use only for transitional periods when authentication may not be
configured at both ends of the BFD session.
detection-time threshold milliseconds
detection time adapts to a value equal to or greater than the threshold, a single trap
and a single system log message are sent.
—Establish BFD sessions only for OSPF neighbors in the full state. The
full-neighbors-only
default behavior is to establish BFD sessions for all OSPF neighbors.
minimum-interval milliseconds
routing device transmits a hello packet and then expects to receive a reply from the
neighbor with which it has established a BFD session.
Range: 1 through 255,000 milliseconds
minimum-receive-interval milliseconds
the routing device expects to receive a reply from a neighbor with which it has
established a BFD session.
Range: 1 through 255,000 milliseconds
—Configure the number of hello packets not received by a neighbor
multiplier number
that causes the originating interface to be declared down.
Range: 1 through 255
Default: 3
—Specify that BFD sessions should not adapt to changing network
no-adaptation
conditions. We recommend that you not disable BFD adaptation unless it is preferable
not to have BFD adaptation enabled in your network.
transmit-interval threshold milliseconds
transmit interval adapts to a value greater than the threshold, a single trap and a
single system log message are sent. The interval threshold must be greater than the
minimum transmit interval.
Range: 0 through 4,294,967,295 (2
transmit-interval minimum-interval milliseconds
the routing device transmits hello packets to a neighbor with which it has established
a BFD session.
Range: 1 through 255,000
—Specify the BFD version to detect.
version
—Configure the algorithm used to authenticate
,
simple-password keyed-md5
, or meticulous-keyed-sha-1
—Associate a security key with the specified
authentication-key-chains key-chain
hierarchy level.
—(Optional) Configure loose authentication checking on the
—Configure a threshold. When the BFD session
—Configure the minimum intervals at which the local
—Configure only the minimum interval at which
—Configure a threshold. When the BFD session
32
– 1)
—Configure the minimum interval at which
, ,
keyed-sha-1
.
Copyright © 2010, Juniper Networks, Inc.