Juniper JUNOS OS 10.4 - FOR EX REV 1 Manual page 2442

For ex series ethernet switches
Table of Contents

Advertisement

Complete Software Guide for Junos
Table 305: show isis database Output Fields (continued)
Field Name
Field Description
Packet
LSP ID
Length
Lifetime
Checksum
Sequence
this number increments.
Attributes
NLPID
Fixed length
TLVs
Area Address
Speaks
IP router id
IP address
Hostname
IP prefix
Metric
originating routing device and the advertised routing device.
IP extended prefix
IS neighbor
IS extended neighbor
address.
show isis database
show isis database
show isis database
brief
2338
®
OS for EX Series Ethernet Switches, Release 10.4
—The identifier for the link-state packet.
—Packet length.
—Remaining lifetime, in seconds.
—The checksum of the LSP.
—The sequence number of the LSP. Every time the LSP is updated,
—Packet attributes.
—Network layer protocol identifier.
—Specifies the set length for the packet.
—Area addresses that the routing device can reach.
—Supported routing protocols.
—ID of the routing device (usually the IP address).
—IPv4 address.
—Assigned name of the routing device.
—IP prefix of the routing device.
—IS-IS metric that measures the cost of the adjacency between the
—Extended IP prefix of the routing device.
—Directly attached neighbor's name and metric.
—Directly attached neighbor's name, metric, and IP
user@host> show isis database
IS-IS level 1 link-state database:
LSP ID
kobuk.00-00
camaro.00-00
ranier.00-00
glacier.00-00
glacier.02-00
badlands.00-00
6 LSPs
IS-IS level 2 link-state database:
LSP ID
kobuk.00-00
camaro.00-00
ranier.00-00
glacier.00-00
glacier.02-00
badlands.00-00
6 LSPs
The output for the
show isis database brief
command. For sample output, see show isis database on page 2338.
database
Sequence Checksum Lifetime Attributes
0x3
0x3167
1057 L1 L2
0x5
0x770e
1091 L1 L2
0x4
0xaa95
1091 L1 L2
0x4
0x206f
1089 L1 L2
0x1
0xd141
1089 L1 L2
0x3
0x87a2
1093 L1 L2
Sequence Checksum Lifetime Attributes
0x6
0x8d6b
1096 L1 L2
0x9
0x877b
1101 L1 L2
0x8
0x855d
1103 L1 L2
0x7
0xf892
1098 L1 L2
0x1
0xd141
1089 L1 L2
0x6
0x562
1105 L1 L2
command is identical to that for the
Copyright © 2010, Juniper Networks, Inc.
Level of Output
extensive
extensive
show isis

Advertisement

Table of Contents
loading

This manual is also suitable for:

Junos os 10.4

Table of Contents