Juniper JUNOS OS 10.4 - FOR EX REV 1 Manual page 1964

Complete Software Guide for Junos
Required Privilege
Level
1860
®
OS for EX Series Ethernet Switches, Release 10.4
port-information-state-machine
port-migration-state-machine
port-receive-state-machine
port-role-select-state-machine
port-role-transit-state-machine
port-state-transit-state-machine
port-transmit-state-machine
—Trace the state and events for the ppmd process
ppmd
state-machine-variables
—Trace protocol timers
timers
topology-change-state-machine
—(Optional) Do not place timestamp information at the beginning of each line
no-stamp
in the trace file.
Default: If you omit this option, timestamp information is placed at the beginning of
each line of the tracing output.
—(Optional) Prevent aney user from reading the log file.
no-world-readable
replace —(Optional) Replace an existing trace file if there is one.
Default: If you do not include this option, tracing output is appended to an existing trace
file.
size size —(Optional) Maximum size of each trace file, in kilobytes (KB) or megabytes
(MB). When a trace file named
When the
.0. trace-file
trace-file .1 and trace-file
until the maximum number of trace files is reached. Then the oldest trace file is
overwritten.
If you specify a maximum file size, you must also specify a maximum number of trace
files with the option.
files
Syntax: to specify KB,
xk
Range: 10 KB through the maximum file size supported on your system
Default: 1 MB
world-readable —(Optional) Allow any user to read the log file.
routing—To view this statement in the configuration.
routing-control—To add this statement to the configuration.
—Trace the port information state machine.
—Trace the port migration state machine.
—Trace the port receive state machine.
—Trace the port role selection state machine.
—Trace the port role transit state machine.
—Trace the port state transit state machine.
—Trace the port transmit state machine
—Trace when the state machine variables change
—Trace the topology change state machine.
reaches this size, it is renamed
trace-file
again reaches its maximum size,
is renamed trace-file .0
to specify MB, or to specify GB
xm xg
trace-file
is renamed
trace-file .0
. This renaming scheme continues
Copyright © 2010, Juniper Networks, Inc.