Juniper JUNOS OS 10.4 - FOR EX REV 1 Manual page 2072

Complete Software Guide for Junos
Required Privilege
Level
Related
Documentation
1968
®
OS for EX Series Ethernet Switches, Release 10.4
NOTE: When you specify the same AS number in more than one routing
instance on the local routing device, you must configure the same number
of loops for the AS number in each instance. For example, if you configure a
value of 3 for the
same AS number as that of the master instance, you must also configure a
value of 3 loops for the AS number in the master instance.
Use the independent-domain
only on a subset of routing instances.
The remaining statement is explained separately.
routing—To view this statement in the configuration.
routing-control—To add this statement to the configuration.
independent-domain
Configuring AS Numbers for BGP
4-Byte Autonomous System Numbers Overview in the Using 4-Byte Autonomous
System Numbers in BGP Networks Technology Overview
Juniper Networks Implementation of 4-Byte Autonomous System Numbers in the Using
4-Byte Autonomous System Numbers in BGP Networks Technology Overview
Configuring 4-Byte Autonomous System Numbers in the Using 4-Byte Autonomous
System Numbers in BGP Networks Technology Overview
statement in a VRF routing instance that uses the
loops
option if the loops statement must be enabled
Copyright © 2010, Juniper Networks, Inc.