Juniper JUNOS OS 10.4 - FOR EX REV 1 Manual page 2326

Complete Software Guide for Junos
2222
®
OS for EX Series Ethernet Switches, Release 10.4
—All RIPng packets
packets
—RIPng information packets such as request, poll, and poll entry packets
request
—RIPng triggered updates
trigger
—RIPng update packets
update
Global Tracing Options
—All tracing operations
all
general —A combination of the
—All normal operations
normal
Default: If you do not specify this option, only unusual or abnormal operations are traced.
—Policy operations and actions
policy
route —Routing table changes
—State transitions
state
task —Routing protocol task processing
—Routing protocol timer processing
timer
—(Optional) Modifier for the tracing flag. You can specify one or more of
flag-modifier
these modifiers:
—Provide detailed trace information
detail
—Packets being received
receive
receive-detail —Provide detailed trace information for packets being received
—Packets being transmitted
send
send-detail —Provide detailed trace information for packets being transmitted
—(Optional) Do not allow any user to read the log file.
no-world-readable
—(Optional) Maximum size of each trace file, in kilobytes (KB), megabytes (MB),
size size
or gigabytes (GB). When a trace file named
. When the
trace-file.0 trace-file
trace-file.1 and trace-file
until the maximum number of trace files is reached. Then, the oldest trace file is
overwritten.
If you specify a maximum file size, you must also specify a maximum number of trace
files with the option.
files
Syntax: to specify KB,
xk xm
Range: 10 KB through the maximum file size supported on your system
Default: 128 KB
—(Optional) Allow any user to read the log file.
world-readable
normal and route trace operations
trace-file
again reaches its maximum size,
is renamed trace-file.0 . This renaming scheme continues
to specify MB, or to specify GB
xg
reaches this size, it is renamed
is renamed
trace-file.0
Copyright © 2010, Juniper Networks, Inc.