L3-Interface - Juniper JUNOS OS 10.4 - FOR EX REV 1 Manual

l3-interface

Syntax
Hierarchy Level
Release Information
Description
Default
Options
Required Privilege
Level
Related
Documentation
Copyright © 2010, Juniper Networks, Inc.
l3-interface vlan.logical-interface-number;
[edit vlans vlan-name]
Statement introduced in Junos OS Release 9.0 for EX Series switches.
Associate a Layer 3 interface with the VLAN. Configure Layer 3 interfaces on trunk ports
to allow the interface to transfer traffic between multiple VLANs. Within a VLAN, traffic
is bridged, while across VLANs, traffic is routed.
No Layer 3 (routing) interface is associated with the VLAN.
vlan.logical-interface-number
command. For the logical interface number, use the same number you
vlan unit
configure in the unit statement.
system—To view this statement in the configuration.
system-control—To add this statement to the configuration.
show ethernet-switching interfaces on page 1445
show vlans on page 1737
Example: Setting Up Basic Bridging and a VLAN for an EX Series Switch on page 1525
Example: Connecting an Access Switch to a Distribution Switch on page 1540
Configuring Routed VLAN Interfaces (CLI Procedure) on page 1601
Understanding Bridging and VLANs on EX Series Switches on page 1501
Chapter 68: Configuration Statements for Bridging and VLANs
—Number of the logical interface defined with a
set interfaces
1671