Scope-Policy - Juniper JUNOS OS 10.4 - FOR EX REV 1 Manual

Complete Software Guide for Junos

scope-policy

Syntax
Hierarchy Level
Release Information
Description
Options
Required Privilege
Level
Related
Documentation
2188
®
OS for EX Series Ethernet Switches, Release 10.4
scope-policy [ policy-names ];
[edit logical-systems logical-system-name routing-options multicast],
[edit routing-options multicast]
NOTE: You can configure a scope policy at these two hierarchy levels only.
You cannot apply a scope policy to a specific routing instance, because all
scoping policies are applied to all routing instances. However, you can apply
the statement to a specific routing instance at the
scope
routing-instance-name routing-options multicast]
logical-system-name routing-instances routing-instance-name routing-options
hierarchy level.
multicast]
Statement introduced before Junos OS Release 7.4.
Statement introduced in Junos OS Release 9.0 for EX Series switches.
Apply policies for scoping. The policy must be correctly configured at the
policy-options policy-statement
policy-names —Name of one or more multicast scope policies.
routing—To view this statement in the configuration.
routing-control—To add this statement to the configuration.
scope on page 2187
Example: Using a Scope Policy for Multicast Scoping
hierarchy level.
Copyright © 2010, Juniper Networks, Inc.
[edit routing-instances
or [edit logical-systems
edit