Juniper JUNOS OS 10.4 - FOR EX REV 1 Manual page 2503

show route active-path
terse
Copyright © 2010, Juniper Networks, Inc.
IS-IS level 1, LSP fragment 0
IS-IS level 2, LSP fragment 0
*Direct Preference: 0
Next hop type: Interface
Next-hop reference count: 3
Next hop: via so-2/1/3.0, selected
State: ‹Active Int›
Local AS:
Age: 24:31
Task: IF
Announcement bits (3): 2-IS-IS 5-Resolve tree 2 6-Resolve tree 3
AS path: I
100.1.2.2/32 (1 entry, 1 announced)
*Local Preference: 0
Next hop type: Local
Next-hop reference count: 11
Interface: so-2/1/3.0
State: ‹Active NoReadvrt Int›
Local AS:
Age: 24:36
Task: IF
Announcement bits (2): 5-Resolve tree 2 6-Resolve tree 3
AS path: I
192.168.64.0/21 (1 entry, 1 announced)
*Direct Preference: 0
Next hop type: Interface
Next-hop reference count: 3
Next hop: via fxp0.0, selected
State: ‹Active Int›
Local AS:
Age: 21:39:47
Task: IF
Announcement bits (2): 5-Resolve tree 2 6-Resolve tree 3
AS path: I
192.168.70.19/32 (1 entry, 1 announced)
*Local Preference: 0
Next hop type: Local
Next-hop reference count: 11
Interface: fxp0.0
State: ‹Active NoReadvrt Int›
Local AS:
Age: 21:39:47
Task: IF
Announcement bits (2): 5-Resolve tree 2 6-Resolve tree 3
AS path: I
user@host> show route active-path terse
inet.0: 7 destinations, 7 routes (6 active, 0 holddown, 1 hidden)
+ = Active Route, - = Last Active, * = Both
A Destination P Prf
* 10.255.70.19/32 D
* 10.255.71.50/32 I
* 100.1.2.0/24 D
* 100.1.2.2/32 L
Chapter 80: Operational Commands for Layer 3 Protocols
200
200
200
200
Metric 1 Metric 2
0
15 10
0
0
Next hop AS path
>lo0.0
>100.1.2.1
>so-2/1/3.0
Local
2399