Table 275: Rip Routing Configuration Summary - Juniper JUNOS OS 10.4 - FOR EX REV 1 Manual

Complete Software Guide for Junos

Table 275: RIP Routing Configuration Summary

Field
General tab
Routing instance name
Preference
Metric Out
Update interval
Route timeout
Policies tab
Import Policy
1918
®
OS for EX Series Ethernet Switches, Release 10.4
Select >
1. Configure Routing
NOTE: After you make changes to the configuration in this page, you must
commit the changes for them to take effect. To commit all changes to
the active configuration, select
Commit Options to Commit Configuration Changes for details about all
commit options.
Click one:
2.
—Configures a RIP instance. Enter information into the RIP Configuration page
Add
as described in Table 275 on page 1918.
Edit —Modifies an existing RIP instance. Enter information into the configuration
page for RIP as described in Table 275 on page 1918.
—Deletes an existing RIP instance.
Delete
To modify RIP global settings, click Edit. Enter information in the configuration as
4.
described in Table 276 on page 1919.
Function
Specifies a name for the routing instance.
Specifies the preference of external routes
learned by RIP as compared to those learned
from other routing protocols.
Specifies the metric value to add to routes
transmitted to the neighbor.
Specifies an update time interval to periodically
send out routes learned by RIP to neighbors.
Specifies the route timeout interval for RIP.
Applies one or more policies to routes being
imported into the local routing device from the
neighbors.
> .
RIP
Commit Options
Your Action
Type or select and edit the name.
Type or select and edit the value.
Type or select and edit the value.
Type or select and edit the value.
Type or select and edit the value.
Click to add an import policy.
Add
Click Move up
selected policy up or down the list of policies.
Click
Remove
Copyright © 2010, Juniper Networks, Inc.
> Commit . See Using the
or Move down to move the
to remove an import policy.