Complete Software Guide for Junos
hello-interval
Syntax
Hierarchy Level
Release Information
Description
Options
Required Privilege
Level
Related
Documentation
2042
®
OS for EX Series Ethernet Switches, Release 10.4
hello-interval seconds;
[edit logical-systems logical-system-name protocols ospf area area-id peer-interface
interface-name],
[edit logical-systems logical-system-name protocols (ospf | ospf3) area area-id interface
interface-name],
[edit logical-systems logical-system-name protocols (ospf | ospf3) area area-id virtual-link],
[edit logical-systems logical-system-name protocols ospf3 realm (ipv4-unicast |
ipv4-multicast | ipv6-multicast) area area-id interface interface-name],
[edit logical-systems logical-system-name routing-instances routing-instance-name protocols
(ospf | ospf3) area area-id interface interface-name],
[edit logical-systems logical-system-name routing-instances routing-instance-name protocols
(ospf | ospf3) area area-id virtual-link],
[edit logical-systems logical-system-name routing-instances routing-instance-name protocols
ospf3 realm (ipv4-unicast | ipv4-multicast | ipv6-multicast) area area-id interface
interface-name],
[edit protocols ospf area area-id peer-interface interface-name],
[edit protocols (ospf | ospf3) area area-id interface interface-name],
[edit protocols (ospf | ospf3) area area-id virtual-link],
[edit protocols ospf3 realm (ipv4-unicast | ipv4-multicast | ipv6-multicast) area area-id
interface interface-name],
[edit routing-instances routing-instance-name protocols (ospf | ospf3) area area-id interface
interface-name],
[edit routing-instances routing-instance-name protocols (ospf | ospf3) area area-id
virtual-link],
[edit routing-instances routing-instance-name protocols ospf3 realm (ipv4-unicast |
ipv4-multicast | ipv6-multicast) area area-id interface interface-name]
Statement introduced before Junos OS Release 7.4.
Statement introduced in Junos OS Release 9.0 for EX Series switches.
Support for the
realm
statement introduced in Junos OS Release 9.2.
Support for the
statement introduced in Junos OS Release 9.2 for EX Series
realm
switches.
Specify how often the routing device sends hello packets out the interface. The hello
interval must be the same for all routing devices on a shared logical IP network.
—Time between hello packets, in seconds.
seconds
Range: 1 through 255 seconds
Default: 10 seconds; 120 seconds (nonbroadcast networks)
routing—To view this statement in the configuration.
routing-control—To add this statement to the configuration.
dead-interval on page 2001
Configuring OSPF Timers
Copyright © 2010, Juniper Networks, Inc.