Maximum-Paths - Juniper JUNOS OS 10.4 - FOR EX REV 1 Manual

maximum-paths

Syntax
Hierarchy Level
Release Information
Description
Options
Required Privilege
Level
Related
Documentation
Copyright © 2010, Juniper Networks, Inc.
maximum-paths path-limit <log-interval seconds> <log-only | threshold value>;
[edit logical-systems logical-system-name routing-instances routing-instance-name
routing-options],
[edit logical-systems logical-system-name routing-options],
[edit routing-instances routing-instance-name routing-options],
[edit routing-options]
Statement introduced in Junos OS Release 8.0.
Statement introduced in Junos OS Release 9.0 for EX Series switches.
Configure a limit for the number of routes installed in a routing table based upon the
route path.
—(Optional) Minimum time interval (in seconds) between log
log-interval seconds
messages.
Range: 5 through 86,400
—(Optional) Sets the route limit as an advisory limit. An advisory limit triggers
log-only
only a warning, and additional routes are not rejected.
path-limit —Maximum number of routes. If this limit is reached, a warning is triggered and
additional routes are rejected.
Range: 1 through 4,294,967,295 (2
Default: No default
threshold value —(Optional) Percentage of the maximum number of routes that starts
triggering warning. You can configure a percentage of the
triggering the warnings.
Range: 1 through 100
NOTE: When the number or routes reaches the
still installed into the routing table while warning messages are sent. When
the number or routes reaches the
rejected.
routing—To view this statement in the configuration.
routing-control—To add this statement to the configuration.
Configuring Route Limits for Routing Tables
Chapter 79: Configuration Statements for Layer 3 Protocols
32
– 1)
threshold
value, then additional routes are
path-limit
value that starts
path-limit
value, routes are
2089