Show Route Detail; Table 323: Show Route Detail Output Fields - Juniper JUNOS OS 10.4 - FOR EX REV 1 Manual

Complete Software Guide for Junos

show route detail

Syntax
Syntax (EX Series
Switch)
Release Information
Description
Options
Required Privilege
Level
List of Sample Output
Output Fields

Table 323: show route detail Output Fields

Field Name Field Description
Name of the routing table (for example,
routing-table-name
Number of destinations for which there are routes in the routing table.
number destinations
Number of routes in the routing table and total number of routes in the following states:
number routes
2420
®
OS for EX Series Ethernet Switches, Release 10.4
show route detail
<destination-prefix>
<logical-system (all | logical-system-name)>
show route detail
<destination-prefix>
Command introduced before Junos OS Release 7.4.
Command introduced in Junos OS Release 9.0 for EX Series switches.
Display detailed information about the active entries in the routing tables.
—Display all active entries in the routing table on all systems.
none
destination-prefix —(Optional) Display active entries for the specified address or range of
addresses.
logical-system (all | logical-system-name)
systems or on a particular logical system.
view
show route detail on page 2429
Table 323 on page 2420 describes the output fields for the
Output fields are listed in the approximate order in which they appear.
(routes that are active)
active
holddown (routes that are in the pending state before being declared inactive)
hidden (routes that are not used because of a routing policy)
—(Optional) Perform this operation on all logical
show route detail
).
inet.0
Copyright © 2010, Juniper Networks, Inc.
command.