Securing Opsfv3 Networks - Juniper JUNOS OS 10.4 - FOR EX REV 1 Manual

Securing OPSFv3 Networks

Related
Documentation
Copyright © 2010, Juniper Networks, Inc.
Specify the value of the security parameter index:
5.
[edit security ipsec security-association sa-name]
user@switch# set spi spi-value
Specify the type of authentication to be used:
6.
[edit security ipsec security-association sa-name]
user@switch# set authentication algorithm type
Specify the encryption algorithm and key:
7.
[edit security ipsec security-association sa-name]
user@switch# set encryption algorithm algorithm key type
You can secure the OSPFv3 network by applying the SA to the OSPFv3 configuration.
To secure the OSPFv3 network:
[edit protocols ospf3 area area-number interface interface-name]
user@switch# set ipsec-sa sa-name
Understanding IPsec Authentication for OSPF Packets on EX Series Switches on
page 1905
Configuring an OSPF Network (J-Web Procedure) on page 1913
For details on these configuration statements, see the
.
Configuration Guide
Chapter 77: Configuring Layer 3 Protocols
Junos OS System Basics
1931