Traffic-Engineering (Ospf) - Juniper JUNOS OS 10.4 - FOR EX REV 1 Manual

Complete Software Guide for Junos

traffic-engineering (OSPF)

Syntax
Hierarchy Level
Release Information
Description
Default
Options
2226
®
OS for EX Series Ethernet Switches, Release 10.4
traffic-engineering {
<advertise-unnumbered-interfaces>;
<credibility-protocol-preference>;
ignore-lsp-metrics;
multicast-rpf-routes;
no-topology;
shortcuts {
lsp-metric-into-summary;
}
}
[edit logical-systems logical-system-name protocols (ospf | ospf3)],
[edit logical-systems logical-system-name routing-instances routing-instance-name protocols
(ospf | ospf3)],
[edit protocols (ospf | ospf3)],
[edit routing-instances routing-instance-name protocols (ospf | ospf3)]
Statement introduced before Junos OS Release 7.4.
option introduced in Junos OS Release 7.5.
multicast-rpf-routes
advertise-unnumbered-interfaces
Statement introduced in Junos OS Release 9.0 for EX Series switches.
Support for OSPFv3 (
ospf3
Support for OSPFv3 (
ospf3
credibility-protocol-preference
credibility-protocol-preference
Series switches.
Enable the OSPF traffic engineering features.
Traffic engineering support is disabled.
advertise-unnumbered-interfaces
identifier in the link-local traffic-engineering link-state advertisement. You do not
need to include this statement if RSVP is able to signal unnumbered interfaces as
defined in RFC 3477.
credibility-protocol-preference
preference value for OSPF routes to calculate the traffic engineering database
credibility value used to select IGP routes. Use this statement to override the default
behavior of having the traffic engineering database prefer IS-IS routes even if OSPF
routes are configured a with a lower, that is, preferred, preference value.
—(Optional) (OSPFv2 only) Install routes for multicast RPF checks
multicast-rpf-routes
into the inet.2 routing table.
—(Optional) (OSPFv2 only) Disable the dissemination of the link-state
no-topology
topology information.
The remaining statements are explained separately.
option introduced in Junos OS Release 8.5.
) introduced in Junos OS Release 9.4.
) introduced in Junos OS Release 9.4 for EX Series switches.
statement introduced in Junos OS Release 9.4.
statement introduced in Junos OS Release 9.4 for EX
—(Optional) (OSPFv2 only) Include the link-local
—(Optional) (OSPFv2 only) Specify to use the configured
Copyright © 2010, Juniper Networks, Inc.