Metric - Juniper JUNOS OS 10.4 - FOR EX REV 1 Manual

metric

Syntax
Hierarchy Level
Release Information
Description
Options
Copyright © 2010, Juniper Networks, Inc.
metric metric;
[edit logical-systems logical-system-name protocols (ospf | ospf3) area area-id interface
interface-name],
[edit logical-systems logical-system-name protocols ospf area area-id interface
interface-name topology (ipv4-multicast | name)],
[edit logical-systems logical-system-name protocols ospf3 realm (ipv4-unicast |
ipv4-multicast | ipv6-multicast) area area-id interface interface-name],
[edit logical-systems logical-system-name routing-instances routing-instance-name protocols
(ospf | ospf3) area area-id interface interface-name],
[edit logical-systems logical-system-name routing-instances routing-instance-name protocols
ospf area area-id sham-link-remote],
[edit logical-systems logical-system-name routing-instances routing-instance-name protocols
ospf area area-id interface interface-name topology (ipv4-multicast | name)],
[edit logical-systems logical-system-name routing-instances routing-instance-name protocols
ospf3 realm (ipv4-unicast | ipv4-multicast | ipv6-multicast) area area-id interface
interface-name],
[edit protocols (ospf | ospf3) area area-id interface interface-name],
[edit protocols ospf area area-id interface interface-name topology (ipv4-multicast | name)],
[edit protocols ospf3 realm (ipv4-unicast | ipv4-multicast | ipv6-multicast) area area-id
interface interface-name],
[edit routing-instances routing-instance-name protocols (ospf | ospf3) area area-id interface
interface-name],
[edit routing-instances routing-instance-name protocols ospf area area-id sham-link-remote],
[edit routing-instances routing-instance-name protocols ospf area area-id interface
interface-name topology (ipv4-multicast | name)],
[edit routing-instances routing-instance-name protocols ospf3 realm (ipv4-unicast |
ipv4-multicast | ipv6-multicast) area area-id interface interface-name]
Statement introduced before Junos OS Release 7.4.
Statement introduced in Junos OS Release 9.0 for EX Series switches.
Support for Multitopology Routing introduced in Junos OS Release 9.0.
Support for Multitopology Routing introduced in Junos OS Release 9.0 for EX Series
switches.
Support for the statement introduced in Junos OS Release 9.2.
realm
Support for the realm statement introduced in Junos OS Release 9.2 for EX Series
switches.
Specify the cost of an OSPF interface. The cost is a routing metric that is used in the
link-state calculation.
To set the cost of routes exported into OSPF, configure the appropriate routing policy.
—Cost of the route.
metric
Range: 1 through 65,535
Default: By default, the cost of an OSPF route is calculated by dividing the
reference-bandwidth value by the bandwidth of the physical interface. Any specific
value you configure for the
reference-bandwidth value to calculate the cost of route for that interface.
Chapter 79: Configuration Statements for Layer 3 Protocols
overrides the default behavior of using the
metric
2095