Table 313: show ospf database Output Fields (continued)
Field Name
Field Description
Checksum value of the LSA.
Cksum
Length of the advertisement, in bytes.
Len
Router link-state advertisement information:
Router
bits
link count
—ID of a routing device or subnet on the link.
id
data
routing device that generated the LSP.
type
TOS count
TOS 0 metric
TOS
metric
Network link-state advertisement information:
Network
mask
attached router
Summary link-state advertisement information:
Summary
mask
TOS
metric
How long until the LSA is regenerated.
Gen timer
How long until the LSA expires.
Aging time
Installed hh:mm:ss
How long ago the route was installed.
ago
How long until the route expires.
expires in hh:mm:ss
Indicates that this is a local advertisement.
Ours
Router LSAs
Number of router link-state advertisements in the link-state database.
Network LSAs
Number of network link-state advertisements in the link-state database.
Summary LSAs
Number of summary link-state advertisements in the link-state database.
show ospf database
show ospf database
Copyright © 2010, Juniper Networks, Inc.
—Flags describing the routing device that generated the LSP.
—Number of links in the advertisement.
—For stub networks, the subnet mask; otherwise, the IP address of the
—Type of link. It can be
PointToPoint
—Number of type-of-service (ToS) entries in the advertisement.
—Metric for ToS 0.
—Type-of-service (ToS) value.
—Metric for the ToS.
—Network mask.
—ID of the attached neighbor.
—Network mask.
—Type-of-service (ToS) value.
—Metric for the ToS.
user@host> show ospf database
OSPF link state database, Area 0.0.0.1
Type
ID
Chapter 80: Operational Commands for Layer 3 Protocols
,
Transit
,
Stub
, or
Virtual
.
Adv Rtr
Seq
Level of Output
All levels
All levels
detail extensive
detail extensive
detail extensive
extensive
extensive
extensive
extensive
extensive
summary
summary
summary
Age
Opt
Cksum
Len
2373