Juniper JUNOS OS 10.4 - FOR EX REV 1 Manual page 2562

Complete Software Guide for Junos
show route inactive-prefix
Syntax
Syntax (EX Series
Switch)
Release Information
Description
Options
Required Privilege
Level
List of Sample Output
Output Fields
show route show route
inactive-prefix inactive-prefix
show route
inactive-prefix detail
2458
®
OS for EX Series Ethernet Switches, Release 10.4
show route inactive-prefix
<brief | detail | extensive | terse>
<logical-system (all | logical-system-name)>
show route inactive-prefix
<brief | detail | extensive | terse>
Command introduced before Junos OS Release 7.4.
Command introduced in Junos OS Release 9.0 for EX Series switches.
Display inactive route destinations in each routing table.
—Display all inactive route destination.
none
brief | detail | extensive | terse
not specify a level of output, the system defaults to brief.
logical-system (all | logical-system-name)
systems or on a particular logical system.
view
show route inactive-prefix on page 2458
show route inactive-prefix detail on page 2458
show route inactive-prefix extensive on page 2459
show route inactive-prefix terse on page 2459
For information about output fields, see the output field tables for the show route
command, the show route detail command, the show route extensive command, or
the show route terse command.
user@host> show route inactive-prefix
inet.0: 14 destinations, 14 routes (13 active, 0 holddown, 1 hidden)
+ = Active Route, - = Last Active, * = Both
127.0.0.1/32 [Direct/0] 00:04:54
> via lo0.0
user@host> show route inactive-prefix detail
inet.0: 14 destinations, 14 routes (13 active, 0 holddown, 1 hidden)
127.0.0.1/32 (1 entry, 0 announced)
Direct Preference: 0
Next hop type: Interface
Next-hop reference count: 1
Next hop: via lo0.0, selected
State: <Hidden Martian Int>
Age: 4:51
Task: IF
—(Optional) Display the specified level of output. If you do
—(Optional) Perform this operation on all logical
Copyright © 2010, Juniper Networks, Inc.