Idle-After-Switch-Over - Juniper JUNOS OS 10.4 - FOR EX REV 1 Manual

Complete Software Guide for Junos

idle-after-switch-over

Syntax
Hierarchy Level
Release Information
Description
Options
Required Privilege
Level
Related
Documentation
2048
®
OS for EX Series Ethernet Switches, Release 10.4
idle-after-switch-over (forever | seconds);
[edit logical-systems logical-system-name protocols bgp],
[edit logical-systems logical-system-name protocols bgp group group-name],
[edit logical-systems logical-system-name protocols bgp group group-name neighbor address],
[edit protocols bgp],
[edit protocols bgp group group-name],
[edit protocols bgp group group-name neighbor address]
Statement introduced in Junos OS Release 9.5.
Statement introduced in Junos OS Release 9.5 for EX Series switches.
Configure the routing device not to automatically reestablish BGP peering sessions after
a nonstop active routing (NSR) switchover. This feature is particularly useful if you are
using dynamic routing policies because the dynamic database is not synchronized with
the backup Routing Engine when NSR is enabled.
forever —Do not reestablish a BGP peering session after an NSR switchover until the
command is issued.
bgp neighbor
seconds —Do not reestablish a BGP peering session after an NSR switchover until after
the specified period.
Range: 1 through 4,294,967,295 (2
routing—To view this statement in the configuration.
routing-control—To add this statement to the configuration.
Preventing Automatic Reestablishment of BGP Peering Sessions After NSR Switchovers
Junos Policy Framework Configuration Guide
Junos High Availability Configuration Guide
32
– 1)
Copyright © 2010, Juniper Networks, Inc.
clear