Authentication-Key - Juniper JUNOS OS 10.4 - FOR EX REV 1 Manual

authentication-key

Syntax
Hierarchy Level
Release Information
Description
Options
Required Privilege
Level
Related
Documentation
Copyright © 2010, Juniper Networks, Inc.
authentication-key password;
[edit logical-systems logical-system-name protocols rip],
[edit logical-systems logical-system-name protocols rip group group-name neighbor
neighbor-name],
[edit logical-systems logical-system-name routing-instances routing-instance-name protocols
rip],
[edit logical-systems logical-system-name routing-instances routing-instance-name protocols
rip group group-name neighbor neighbor-name],
[edit protocols rip],
[edit protocols rip group group-name neighbor neighbor-name],
[edit routing-instances routing-instance-name protocols rip],
[edit routing-instances routing-instance-name protocols rip group group-name neighbor
neighbor-name]
Statement introduced before Junos OS Release 7.4.
Statement introduced in Junos OS Release 9.0 for EX Series switches.
Require authentication for RIP route queries received on an interface.
password —Authentication password. If the password does not match, the packet is
rejected. The password can be from 1 through 16 contiguous characters long and
can include any ASCII strings.
routing—To view this statement in the configuration.
routing-control—To add this statement to the configuration.
Configuring Authentication for RIP
Chapter 79: Configuration Statements for Layer 3 Protocols
1961