Centralized; Configuring Distributed Periodic Packet Management On An Ex Series Switch - Juniper JUNOS OS 10.4 - FOR EX REV 1 Manual

centralized

Syntax
Hierarchy Level
Release Information
Description
Default
Required Privilege
Level
Related
Documentation
Copyright © 2010, Juniper Networks, Inc.
centralized;
[edit protocols lacp ppm]
Statement introduced in Junos OS Release 10.2 for EX Series switches.
Disable distributed periodic packet management (PPM) processing for Link Aggregation
Control Protocol (LACP) packets and run all PPM processing for LACP packets on the
Routing Engine.
This statement disables distributed PPM processing for only LACP packets. You can
disable distributed PPM processing for all packets that use PPM and run all PPM
processing on the Routing Engine by configuring the
in the
[edit routing-options ppm]
BEST PRACTICE: We recommend that, generally, you disable distributed
PPM only if Juniper Networks Customer Service advises you to do so. You
should disable distributed PPM only if you have a compelling reason to disable
it.
Distributed PPM processing is enabled for all packets that use PPM.
routing—To view this statement in the configuration.
routing-control—To add this statement to the configuration.
Configuring Distributed Periodic Packet Management on an EX Series Switch (CLI
Procedure) on page 1929
Configuring Aggregated Ethernet LACP (CLI Procedure) on page 1334
Chapter 79: Configuration Statements for Layer 3 Protocols
no-delegate-processing
hierarchy.
statement
1993