Show Isis Interface; Table 307: Show Isis Interface Output Fields - Juniper JUNOS OS 10.4 - FOR EX REV 1 Manual

Complete Software Guide for Junos

show isis interface

Syntax
Syntax (EX Series
Switch)
Release Information
Description
Options
Required Privilege
Level
List of Sample Output
Output Fields

Table 307: show isis interface Output Fields

Field Name Field Description
Name of the interface.
interface-name
Routing device selected by other routers that is responsible for sending link-state
Designated router
advertisements that describe the network. Used only on broadcast networks.
Interface index assigned by the Junos kernel.
Index
Internal implementation information.
State
Circuit id Circuit identifier.
2344
®
OS for EX Series Ethernet Switches, Release 10.4
show isis interface
<brief | detail | extensive>
<interface-name>
<logical-system (all | logical-system-name)>
show isis interface
<brief | detail | extensive>
<interface-name>
Command introduced before Junos OS Release 7.4.
Command introduced in Junos OS Release 9.0 for EX Series switches.
Display status information about Intermediate System-to-Intermediate System
(IS-IS)-enabled interfaces.
none —Display standard information about all IS-IS-enabled interfaces.
—(Optional) Display the specified level of output.
brief | detail | extensive
—(Optional) Display information about the specified interface only.
interface-name
logical-system (all | logical-system-name)
systems or on a particular logical system.
view
show isis interface on page 2346
show isis interface brief on page 2346
show isis interface detail on page 2346
show isis interface extensive on page 2346
show isis interface extensive (with LDP) on page 2347
Table 307 on page 2344 describes the output fields for the
Output fields are listed in the approximate order in which they appear.
—(Optional) Perform this operation on all logical
show isis interface
Copyright © 2010, Juniper Networks, Inc.
command.
Level of Output
detail
detail
detail
detail
detail