Leave-Timer - Juniper JUNOS OS 10.4 - FOR EX REV 1 Manual

Required Privilege
Level
Related
Documentation

leave-timer

Syntax
Hierarchy Level
Release Information
Description
Default
Options
Required Privilege
Level
Related
Documentation
Copyright © 2010, Juniper Networks, Inc.
—VLAN Spanning Tree Protocol
vstp
—VLAN Trunking Protocol
vtp
system—To view this statement in the configuration.
system-control—To add this statement to the configuration.
show ethernet-switching layer2-protocol-tunneling interface on page 1708
show ethernet-switching layer2-protocol-tunneling statistics on page 1710
show ethernet-switching layer2-protocol-tunneling vlan on page 1713
Example: Configuring Layer 2 Protocol Tunneling on EX Series Switches on page 1592
Configuring Layer 2 Protocol Tunneling on EX Series Switches (CLI Procedure) on
page 1614
leave-timer milliseconds;
[edit protocols gvrp]
Statement introduced in Junos OS Release 9.0 for EX Series switches.
For GARP VLAN Registration Protocol (GVRP), configure the number of milliseconds an
interface waits after receiving a leave message before the interface leaves the VLAN
specified in the message. If the interface receives a join message before the timer expires,
the software keeps the interface in the VLAN.
60 centiseconds
—Number of milliseconds. At a minimum, the leave timer interval should be
milliseconds
twice the join timer interval.
Default: 60 centiseconds
routing—To view this statement in the configuration.
routing-control—To add this statement to the configuration.
show gvrp on page 1727
Example: Configure Automatic VLAN Administration Using GVRP on page 1549
Chapter 68: Configuration Statements for Bridging and VLANs
1673