Juniper JUNOS OS 10.4 - FOR EX REV 1 Manual page 1700

Complete Software Guide for Junos
Meaning
Related
Documentation
1596
®
OS for EX Series Ethernet Switches, Release 10.4
user@switchA> show ethernet-switching layer2-protocol-tunneling interface
Layer2 Protocol Tunneling information:
Interface Operation
ge-0/0/0.0 Encapsulation
ge-0/0/1.0 Decapsulation
ge-0/0/2.0 Decapsulation
The show vlans extensive customer-1
have been enabled. The
show ethernet-switching layer2-protocol-tunneling vlan customer-1
command shows that L2PT is tunneling the STP protocol on VLAN
threshold is set to 50 , and the shutdown threshold is set to
ethernet-switching layer2-protocol-tunneling interface
operation being performed on each interface, the state of each interface and, if the state
is Shutdown , the reason why the interface is shut down.
Configuring Layer 2 Protocol Tunneling on EX Series Switches (CLI Procedure) on
page 1614
Understanding Layer 2 Protocol Tunneling on EX Series Switches on page 1520
State Description
Shutdown Shutdown threshold exceeded
Shutdown Loop detected
Active
command shows that Q-in-Q tunneling and L2PT
command shows the type of
Copyright © 2010, Juniper Networks, Inc.
, the drop
customer-1
100 . The show