Bridge-Priority - Juniper JUNOS OS 10.4 - FOR EX REV 1 Manual

bridge-priority

Syntax
Hierarchy Level
Release Information
Description
Default
Options
Required Privilege
Level
Related
Documentation
Copyright © 2010, Juniper Networks, Inc.
bridge-priority priority;
[edit protocols mstp],
[edit protocols mstp msti msti-id],
[edit protocols rstp],
[edit protocols stp],
[edit protocols vstp vlan vlan-id]
Statement introduced in Junos OS Release 9.0 for EX Series switches.
Statement updated in Junos OS Release 9.4 for EX Series switches to add VSTP support.
Configure the bridge priority. The bridge priority determines which bridge is elected as
the root bridge. If two bridges have the same path cost to the root bridge, the bridge
priority determines which bridge becomes the designated bridge for a LAN segment.
32,768
—Bridge priority. It can be set only in increments of 4096.
priority
Range: 0 through 61,440
Default: 32,768
routing—To view this statement in the configuration.
routing-control—To add this statement to the configuration.
show spanning-tree bridge on page 1878
show spanning-tree interface on page 1887
Example: Configuring Network Regions for VLANs with MSTP on EX Series Switches
on page 1775
Understanding MSTP for EX Series Switches on page 1755
Understanding VSTP for EX Series Switches on page 1760
Chapter 68: Configuration Statements for Bridging and VLANs
1651