Edit Routing-Instances] Configuration Hierarchy; Edit Vlans] Configuration Statement Hierarchy - Juniper JUNOS OS 10.4 - FOR EX REV 1 Manual

[edit routing-instances] Configuration Hierarchy

Related
Documentation

[edit vlans] Configuration Statement Hierarchy

Related
Documentation
Copyright © 2010, Juniper Networks, Inc.
Understanding STP for EX Series Switches on page 1751
Understanding How to Use sFlow Technology for Network Monitoring on an EX Series
Switch on page 3871
Understanding VSTP for EX Series Switches on page 1760
routing-instances routing-instance-name {
instance-type virtual-router
interface interface-name
}
Example: Using Virtual Routing Instances to Route Among VLANs on EX Series Switches
on page 1577
Configuring Virtual Routing Instances (CLI Procedure) on page 1606
vlans {
vlan-name {
description text-description;
dot1q-tunneling {
customer-vlans (id | native | range);
layer2-protocol-tunneling all | protocol-name {
drop-threshold number;
shutdown-threshold number;
}
}
filter input filter-name;
filter output filter-name;
interface interface-name {
mapping (native (push | swap) | policy | tag (push | swap));
pvlan-trunk;
}
isolation-id id-number;
l3-interface vlan.logical-interface-number;
mac-limit number;
mac-table-aging-time seconds;
no-local-switching;
no-mac-learning;
primary-vlan vlan-name;
vlan-id number;
vlan-range vlan-id-low-vlan-id-high;
}
}
Example: Setting Up Basic Bridging and a VLAN for an EX Series Switch on page 1525
Example: Setting Up Bridging with Multiple VLANs for EX Series Switches on page 1532
Example: Configure Automatic VLAN Administration Using GVRP on page 1549
Chapter 68: Configuration Statements for Bridging and VLANs
1649