Disable (Mvrp) - Juniper JUNOS OS 10.4 - FOR EX REV 1 Manual

Complete Software Guide for Junos
disable
Syntax
Hierarchy Level
Release Information
Description
Default
Required Privilege
Level
Related
Documentation

disable (MVRP)

Syntax
Hierarchy Level
Release Information
Description
Default
Required Privilege
Level
Related
Documentation
1654
®
OS for EX Series Ethernet Switches, Release 10.4
disable;
[edit protocols gvrp],
[edit protocols gvrp interface [interface-name]
Statement introduced in Junos OS Release 9.0 for EX Series switches.
NOTE: As of Junos OS Release 9.2, GVRP can be enabled only on trunk
interfaces.
Disable the GVRP configuration on the interface.
If you do not configure GVRP, it is disabled. You can use this command to disable a prior
configuration of GVRP on a specified interface.
routing—To view this statement in the configuration.
routing-control—To add this statement to the configuration.
show gvrp on page 1727
Example: Configure Automatic VLAN Administration Using GVRP on page 1549
disable;
[edit protocols mvrp],
[edit protocols mvrp interface(all | interface-name)]
Statement introduced in Junos OS Release 10.0 for EX Series switches.
Disable the MVRP configuration on the interface.
MVRP is disabled by default.
routing—To view this statement in the configuration.
routing-control—To add this statement to the configuration.
Configuring Multiple VLAN Registration Protocol (MVRP) (CLI Procedure) on page 1611
Copyright © 2010, Juniper Networks, Inc.