Subscriber-Leave-Timer - Juniper JUNOS OS 10.4 - FOR EX REV 1 Manual

Complete Software Guide for Junos

subscriber-leave-timer

Syntax
Hierarchy Level
Release Information
Description
Options
Required Privilege
Level
Related
Documentation
2202
®
OS for EX Series Ethernet Switches, Release 10.4
subscriber-leave-timer seconds;
[edit logical-systems logical-system-name routing-instances routing-instance-name
routing-options multicast interface interface-name],
[edit logical-systems logical-system-name routing-options multicast
interface interface-name],
[edit routing-instances routing-instance-name routing-options multicast
interface interface-name],
[edit routing-options multicast interface interface-name]
Statement introduced in Junos OS Release 9.2.
Statement introduced in Junos OS Release 9.2 for EX Series switches.
Length of time before the multicast VLAN updates QoS data (for example, available
bandwidth) for subscriber interfaces after it receives an IGMP leave message.
—Length of time before the multicast VLAN updates QoS data (for example,
seconds
available bandwidth) for subscriber interfaces after it receives an IGMP leave
message. Specifying a value of 0 results in an immediate update; this is the same
as if the statement were not configured.
Range: 0 through 30
Default: 0 seconds
routing—To view this statement in the configuration.
routing-control—To add this statement to the configuration.
Managing Subscriber Overcommitment
Copyright © 2010, Juniper Networks, Inc.