Table of Contents
Advertisement
show isis backup label-switched-path
Syntax
Syntax (EX Series
Switch)
Release Information
Description
Options
Required Privilege
Level
Related
Documentation
List of Sample Output
Output Fields
Table 303: show isis backup label-switched-path Output Fields
Field Name
Field Description
List of MPLS LSPs designated as backup paths for IS-IS routes.
Backup MPLS LSPs
IP address of the egress routing device for the LSP.
Egress
Status
State of the LSP:
Time elapsed since the neighbor state changed either from up or down or from down to up. The format
Last change
is
Configured traffic engineering metric.
TE-metric
Copyright © 2010, Juniper Networks, Inc.
show isis backup label-switched-path
<logical-system (all | logical-system-name)>
show isis backup label-switched-path
Command introduced in Junos OS Release 9.5.
Command introduced in Junos OS Release 9.5 for EX Series switches.
Display information about MPLS label-switched-paths (LSPs) designated as backup
routes for IS-IS routes.
—Display information about MPLS LSPs designated as backup routes for IS-IS
none
routes.
logical-system (all | logical-system-name
systems or on a particular logical system.
view
show isis backup coverage on page 2329
show isis backup label-switched-path on page 2332
Table 303 on page 2331 lists the output fields for the
command. Output fields are listed in the approximate order in which they appear.
—The router can detect RSVP hello messages from the neighbor.
Up
—The router has received one of the following indications:
Down
Communication failure from the neighbor.
Communication from IGP that the neighbor is unavailable.
Change in the sequence numbers in the RSVP hello messages sent by the neighbor.
—LSP is no longer available as a backup path.
Deleted
.
hh:mm:ss
Chapter 80: Operational Commands for Layer 3 Protocols
—(Optional) Perform this operation on all logical
show isis backup label-switched-path
2331
Advertisement
Chapters
Table of Contents
Troubleshooting
