Clear Ethernet-Switching Layer2-Protocol-Tunneling Error - Juniper JUNOS OS 10.4 - FOR EX REV 1 Manual

Complete Software Guide for Junos

clear ethernet-switching layer2-protocol-tunneling error

Syntax
Release Information
Description
Options
Required Privilege
Level
Related
Documentation
List of Sample Output
clear clear
ethernet-switching ethernet-switching
layer2-protocol-tunneling layer2-protocol-tunneling
error error
clear
ethernet-switching
layer2-protocol-tunneling
error interface
ge-0/1/1.0
1700
®
OS for EX Series Ethernet Switches, Release 10.4
clear ethernet-switching layer2-protocol-tunneling error
<interface interface-name>
Command introduced in Junos OS Release 10.0 for EX Series switches.
Clear Layer 2 protocol tunneling (L2PT) errors on one or more interfaces. If an interface
has been disabled because the amount of Layer 2 protocol traffic exceeded the
shutdown-threshold or because the switch has detected an error in the network topology
or configuration, use this command to reenable the interface.
—Clears L2PT errors on all interfaces.
none
interface interface-name —(Optional) Clear L2PT errors on the specified interface.
view
Example: Configuring Layer 2 Protocol Tunneling on EX Series Switches on page 1592
Configuring Layer 2 Protocol Tunneling on EX Series Switches (CLI Procedure) on
page 1614
clear ethernet-switching layer2-protocol-tunneling error on page 1700
clear ethernet-switching layer2-protocol-tunneling error interface ge-0/1/1.0 on page 1700
user@switch> clear ethernet-switching layer2-protocol-tunneling error
user@switch> clear ethernet-switching layer2-protocol-tunneling error interface ge-0/1/1.0
Copyright © 2010, Juniper Networks, Inc.