Juniper JUNOS OS 10.4 - FOR EX REV 1 Manual page 2383

show (ospf | ospf3) overview
Syntax
Syntax (EX Series
Switch)
Release Information
Description
Options
Required Privilege
Level
List of Sample Output
Output Fields
Table 289: show ospf overview Output Fields
Field name Field Description
Instance OSPF routing instance.
Router ID Router ID of the routing device.
Copyright © 2010, Juniper Networks, Inc.
show (ospf | ospf3) overview
<brief | extensive>
<instance instance-name>
<logical-system (all | logical-system-name)>
<realm (ipv4-multicast | ipv4-unicast | ipv6-multicast)>
show (ospf | ospf3) overview
<brief | extensive>
<instance instance-name>
Command introduced in Junos OS Release 7.4.
Command introduced in Junos OS Release 9.0 for EX Series switches.
option introduced in Junos OS Release 9.2.
realm
Database protection introduced in Junos 10.2.
Display Open Shortest Path First (OSPF) overview information.
—Display standard information about all OSPF neighbors for all routing instances.
none
brief | extensive —(Optional) Display the specified level of output.
—(Optional) Display all OSPF interfaces under the named routing
instance instance-name
instance.
logical-system (all | logical-system-name)
systems or on a particular logical system.
realm (ipv4-multicast | ipv4-unicast | ipv6-multicast)
information about the specified OSPFv3 realm, or address family. Use the
option to specify an address family for OSPFv3 other than IPv6 unicast, which is the
default.
view
show ospf overview on page 2281
show ospf overview (with Database Protection) on page 2281
show ospf3 overview (with database protection) on page 2282
show ospf overview extensive on page 2282
Table 289 on page 2279 lists the output fields for the
fields are listed in the approximate order in which they appear.
Chapter 80: Operational Commands for Layer 3 Protocols
—(Optional) Perform this operation on all logical
—(Optional) (OSPFv3 only) Display
show ospf overview
realm
command. Output
Level of Output
All levels
All levels
2279