Metric-In - Juniper JUNOS OS 10.4 - FOR EX REV 1 Manual

metric-in

Syntax
Hierarchy Level
Release Information
Description
Options
Required Privilege
Level
Related
Documentation
Copyright © 2010, Juniper Networks, Inc.
metric-in metric;
[edit logical-systems logical-system-name protocols rip],
[edit logical-systems logical-system-name protocols rip group group-name neighbor
neighbor-name],
[edit logical-systems logical-system-name routing-instances routing-instance-name protocols
rip],
[edit logical-systems logical-system-name routing-instances routing-instance-name protocols
rip group group-name neighbor neighbor-name],
[edit protocols rip],
[edit protocols rip group group-name neighbor neighbor-name],
[edit routing-instances routing-instance-name protocols rip],
[edit routing-instances routing-instance-name protocols rip group group-name neighbor
neighbor-name]
Statement introduced before Junos OS Release 7.4.
Statement introduced in Junos OS Release 9.0 for EX Series switches.
Specify the metric to add to incoming routes when advertising into RIP routes that were
learned from other protocols. Use this statement to configure the routing device to prefer
RIP routes learned through a specific neighbor.
—Metric value.
metric
Range: 1 through 16
Default: 1
routing—To view this statement in the configuration.
routing-control—To add this statement to the configuration.
Configuring the Metric Value Added to Imported RIP Routes
Chapter 79: Configuration Statements for Layer 3 Protocols
2097