Example: Configuring Network Regions For Vlans With Mstp On Ex Series - Juniper JUNOS OS 10.4 - FOR EX REV 1 Manual

bpdu-block
Syntax
Hierarchy Level
Release Information
Description
Required Privilege
Level
Related
Documentation
Copyright © 2010, Juniper Networks, Inc.
bpdu-block {
interface (all | [interface-name]);
disable-timeout timeout;
}
[edit ethernet-switching-options]
Statement introduced in Junos OS Release 9.1 for EX Series switches.
Configure BPDU protection on an interface. If the interface receives BPDUs, it is disabled.
The statements are explained separately.
system—To view this statement in the configuration.
system-control—To add this statement to the configuration.
show spanning-tree bridge on page 1878
show spanning-tree interface on page 1887
clear ethernet-switching bpdu-error on page 1870
Example: Configuring BPDU Protection on non-STP Interfaces to Prevent STP
Miscalculations on EX Series Switches on page 1799
Unblocking an Interface That Receives BPDUs in Error (CLI Procedure) on page 1813
Example: Configuring Network Regions for VLANs with MSTP on EX Series Switches
on page 1775
Example: Configuring Faster Convergence and Improving Network Stability with RSTP
on EX Series Switches on page 1761
Chapter 74: Configuration Statements for Spanning-Tree Protocols
1833