Table 279: Terms Configuration Parameters - Juniper JUNOS OS 10.4 - FOR EX REV 1 Manual

Complete Software Guide for Junos

Table 279: Terms Configuration Parameters

Field Function
Term Name Specifies a term name.
Source tab
Family Specifies an address family protocol.
Routing Instance Specifies a routing instance.
RIB Specifies the name of a routing table.
Preference Specifies the individual preference value for the route.
Metric Specifies a metric value. You can specify up to four metric
values.
Interface Specifies a name or IP address of one or more routing device
interfaces. Do not use this qualifier with protocols that are not
interface-specific, such as internal BGP (IBGP).
Prefix List Specifies a named list of IP addresses. You can specify an exact
match with incoming routes.
Protocol Specifies the name of the protocol from which the route was
learned or to which the route is being advertised.
Policy Specifies the name of a policy to evaluate as a subroutine.
More Specifies advanced configuration options for policies.
OSPF Area ID Specifies the area identifier.
BGP Origin Specifies the origin of the AS path information.
Local Preference Specifies the BGP local preference.
1926
®
OS for EX Series Ethernet Switches, Release 10.4
Your Action
Type or select and edit the name.
Select a value from the list.
Select a value from the list.
Select a value from the list
Type or select and edit the value.
Type or select and edit the value.
To add an interface, select
Add >
Interface . Select the interface from the
list.
To add an address, select Add > Address
Select the address from the list.
To remove an interface, select it and click
.
Remove
Click Add . Select the prefix list from the
list and click .
OK
To remove a prefix list, select it and click
.
Remove
Click and select the protocol from
Add
the list.
To remove a protocol, select it and click
.
Remove
Click . Select the policy from the list.
Add
To remove a policy, select it and click
.
Remove
Click for advanced configuration.
More
Type the IP address.
Select a value from the list.
Type a value.
Copyright © 2010, Juniper Networks, Inc.
.