Juniper JUNOS OS 10.4 - FOR EX REV 1 Manual page 1731

Meaning
Copyright © 2010, Juniper Networks, Inc.
pvlan
pvlan
pvlan
pvlan
pvlan
__pvlan_pvlan_isolated1__ *
__pvlan_pvlan_isolated1__ MAC4
__pvlan_pvlan_isolated2__ *
__pvlan_pvlan_isolated2__ MAC3
__pvlan_pvlan_isolated2__ MAC4
community1
community1
community1
community2
community2
community2
NOTE: If you have configured a PVLAN spanning multiple switches, you can
use the same command on all the switches to check the logs for MAC learning
on the those switches.
In the samples for a PVLAN on a single switch, you can see that the primary VLAN contains
two community domains (
trunk ports. The PVLAN on a single switch has only one tag (
VLAN.
The PVLAN that spans multiple switches contains multiple tags:
The community domain,
The community domain,
The inter-switch isolated domain is identified with tag
The primary VLAN,
primary
Also, for the PVLAN that spans multiple switches, the trunk interfaces are identified as
.
pvlan-trunk
Chapter 66: Verifying Bridging and VLAN Configuration
* Flood
MAC1 Replicated
MAC2 Replicated
MAC3 Replicated
MAC4 Learn
Flood
Replicated
Flood
Learn
Replicated
* Flood
MAC1 Learn
MAC4 Replicated
* Flood
MAC2 Learn
MAC4 Replicated
and
community1 community2
, is identified with tag
COM1
is identified with tag
community2
, is identified with tag
10
- All-members
- interface a
- interface c
- isolated2
0 trunk1
- All-members
- trunk1
- All-members
0 isolated2
- trunk1
- All-members
0 interface a
- trunk1
- All-members
0 interface c
- trunk1
), two isolated ports, and two
1000 ), which is for the primary
.
100
.
20
.
50
.
1627