Juniper JUNOS OS 10.4 - FOR EX REV 1 Manual page 2404

For ex series ethernet switches
Table of Contents

Advertisement

Complete Software Guide for Junos
Table 296: show bgp group Output Fields (continued)
Field Name
Route Queue Timer
Route Queue
inet.number
Table inet.number
Groups
Peers
External
Internal
Down peers
2300
®
OS for EX Series Ethernet Switches, Release 10.4
Field Description
Number of seconds until queued routes are sent. If this time has
already elapsed, this field displays the number of seconds by which
the updates are delayed.
Number of prefixes that are queued up for sending to the peers in
the group.
Number of active, received, accepted, and damped routes in the
routing table. For example,
7 active routes, 10 received routes, 9 accepted routes, and no
damped routes from a BGP peer appear in the
Information about the routing table.
Received prefixes
active and inactive, that are in the routing table.
Active prefixes
—Number of prefixes received from the peer that
are active in the routing table.
Suppressed due to damping
because of damping or other reasons. These routes do not appear
in the forwarding table and are not exported by routing protocols.
Advertised prefixes
Received external prefixes
external BGP (EBGP) peers, both active and inactive, that are in
the routing table.
Active external prefixes
EBGP peers that are active in the routing table.
Externals suppressed
peers currently inactive because of damping or other reasons.
Received internal prefixes
peers, both active and inactive, that are in the routing table.
Active internal prefixes
IBGP peers that are active in the routing table.
Internals suppressed
currently inactive because of damping or other reasons.
—Status of the graceful restart process for this routing
RIB State
table:
BGP restart is complete
, or
in progress
VPN restart is complete
Total number of groups.
Total number of peers.
Total number of external peers.
Total number of internal peers.
Total number of unavailable peers.
inet.0: 7/10/9/0
indicates the following:
inet.0
—Total number of prefixes from the peer, both
—Number of routes currently inactive
—Number of prefixes advertised to a peer.
—Total number of prefixes from the
—Number of prefixes received from the
—Number of routes received from EBGP
—Total number of prefixes from the IBGP
—Number of prefixes received from the
—Number of routes received from IBGP peers
,
BGP restart in progress
.
Copyright © 2010, Juniper Networks, Inc.
Level of
Output
detail
detail
none
routing table.
detail
,
VPN restart
All levels
All levels
All levels
All levels
All levels

Advertisement

Table of Contents
loading

This manual is also suitable for:

Junos os 10.4

Table of Contents