Juniper JUNOS OS 10.4 - FOR EX REV 1 Manual page 1683

Verification
Purpose
Action
Copyright © 2010, Juniper Networks, Inc.
}
ge-0/0/2 {
unit 0 {
family ethernet-switching;
}
}
ge-0/0/3 {
vlan-tagging;
unit 0 {
vlan-id 1030;
family inet {
address 103.1.1.1/24;
}
}
unit 1 {
vlan-id 1031;
family inet {
address 103.1.1.1/24;
}
}
}
routing-instances {
r1 {
instance-type virtual-router;
interface ge-0/0/1.0;
interface ge-0/0/3.0;
}
r2 {
instance-type virtual-router;
interface ge-0/0/2.0;
interface ge-0/0/3.1;
}
}
To confirm that the configuration is working properly, perform these tasks:
Verifying That the Routing Instances Were Created on page 1579
Verifying That the Routing Instances Were Created
Verify that the virtual routing instances were properly created on the switch.
Use the
show route instance
user@switch> show route instance
Instance Type
Primary RIB
master forwarding
inet.0
r1 virtual-router
r1.inet.0
r2 virtual-router
Chapter 64: Examples: Bridging and VLAN Configuration
command:
Active/holddown/hidden
3/0/0
1/0/0
1579