Interface (Multicast Via Static Routes) - Juniper JUNOS OS 10.4 - FOR EX REV 1 Manual

Complete Software Guide for Junos

interface (Multicast via Static Routes)

Syntax
Hierarchy Level
Release Information
Description
Options
Required Privilege
Level
Related
Documentation
2066
®
OS for EX Series Ethernet Switches, Release 10.4
interface interface-names {
maximum-bandwidth bps;
no-qos-adjust;
reverse-oif-mapping {
no-qos-adjust;
}
subscriber-leave-timer seconds;
}
[edit logical-systems logical-system-name routing-instances routing-instance-name
routing-options multicast],
[edit logical-systems logical-system-name routing-options multicast],
[edit routing-instances routing-instance-name routing-options multicast],
[edit routing-options multicast]
Statement introduced in Junos OS Release 8.1.
Statement introduced in Junos OS Release 9.0 for EX Series switches.
Enable multicast traffic on an interface.
NOTE: You cannot enable multicast traffic on an interface using the
statement and configure PIM on the same interface simultaneously.
interface-name —Name of the interface on which to enable multicast traffic. Specify the
to enable multicast traffic on the interface.
interface-name
routing—To view this statement in the configuration.
routing-control—To add this statement to the configuration.
Enabling Multicast Forwarding Without PIM
enable
Copyright © 2010, Juniper Networks, Inc.