Show Route Brief - Juniper JUNOS OS 10.4 - FOR EX REV 1 Manual

show route brief

Syntax
Syntax (EX Series
Switch)
Release Information
Description
Options
Required Privilege
Level
List of Sample Output
Output Fields
show route brief show route brief
Copyright © 2010, Juniper Networks, Inc.
show route brief
<destination-prefix>
<logical-system (all | logical-system-name)>
show route brief
<destination-prefix>
Command introduced before Junos OS Release 7.4.
Command introduced in Junos OS Release 9.0 for EX Series switches.
Display brief information about the active entries in the routing tables.
—Display all active entries in the routing table.
none
destination-prefix —(Optional) Display active entries for the specified address or range of
addresses.
logical-system (all | logical-system-name)
systems or on a particular logical system.
view
show route brief on page 2409
For information about output fields, see the Output Field table of the show route
command.
user@host> show route brief
inet.0: 10 destinations, 10 routes (9 active, 0 holddown, 1 hidden)
+ = Active Route, - = Last Active, * = Both
0.0.0.0/0 *[Static/5] 1w5d 20:30:29
Discard
10.255.245.51/32 *[Direct/0] 2w4d 13:11:14
> via lo0.0
172.16.0.0/12 *[Static/5] 2w4d 13:11:14
> to 192.168.167.254 via fxp0.0
192.168.0.0/18 *[Static/5] 1w5d 20:30:29
> to 192.168.167.254 via fxp0.0
192.168.40.0/22 *[Static/5] 2w4d 13:11:14
> to 192.168.167.254 via fxp0.0
192.168.64.0/18 *[Static/5] 2w4d 13:11:14
> to 192.168.167.254 via fxp0.0
192.168.164.0/22 *[Direct/0] 2w4d 13:11:14
> via fxp0.0
192.168.164.51/32 *[Local/0] 2w4d 13:11:14
Local via fxp0.0
207.17.136.192/32 *[Static/5] 2w4d 13:11:14
> to 192.168.167.254 via fxp0.0
Chapter 80: Operational Commands for Layer 3 Protocols
—(Optional) Perform this operation on all logical
2409