Show Gvrp; Table 246: Show Gvrp Output Fields - Juniper JUNOS OS 10.4 - FOR EX REV 1 Manual

show gvrp

Syntax
Release Information
Description
Options
Required Privilege
Level
Related
Documentation
List of Sample Output
Output Fields

Table 246: show gvrp Output Fields

Field Name Field Description
Global GVRP Displays global GVRP information:
Configuration
GVRP status
Join
advertisements.
Leave
remove the interface from the VLAN specified in the message.
Leaveall
maintain current GVRP VLAN membership information in the network.
Interface based Displays interface-specific GVRP information:
configuration
Interface
GVRP status
show gvrp show gvrp
Copyright © 2010, Juniper Networks, Inc.
show gvrp
Command introduced in Junos OS Release 9.0 for EX Series switches.
Display GARP VLAN Registration Protocol (GVRP) information.
—Displays all GVRP configuration attributes.
none
interface interface-name —(Optional) Displays GVRP statistics for a specific interface
only.
view
show gvrp statistics on page 1729
Example: Configure Automatic VLAN Administration Using GVRP on page 1549
show gvrp on page 1727
Table 246 on page 1727 lists the output fields for the
are listed in the approximate order in which they appear.
—Displays whether GVRP is
—The maximum number of milliseconds the interfaces must wait before sending VLAN
— The number of milliseconds an interface must wait after receiving a Leave message to
—The interval at which Leave All messages are sent on interfaces. Leave all messages
—The interface on which GVRP is configured..
—Displays whether GVRP is
user@switch> show gvrp
Global GVRP configuration
GVRP status : Enabled
GVRP timers (ms)
Join : 40
Leave : 120
Leaveall : 2000
Chapter 69: Operational Commands for Bridging and VLANs
show gvrp
enabled or disabled .
enabled or disabled .
command. Output fields
1727