Configuring A Rip Network (J-Web Procedure) - Juniper JUNOS OS 10.4 - FOR EX REV 1 Manual

Table 274: Edit OSPF Global Settings (continued)
Field Function
Policies tab
Import Policy Specifies one or more policies to control which
routes learned from an area are used to generate
summary link-state advertisements (LSAs) into
other areas.
Export Policy Specifies one or more policies to control which
summary LSAs are flooded into an area.
Trace Options tab
File Name Specifies the name of the file to receive the
output of the tracing operation.
Number of Files Specifies the maximum number of trace files.
File Size Specifies the maximum size for each trace file.
World Readable Specifies whether the trace file can be read by
any user or not.
Flags Specifies the tracing operation to perform.
Related
Documentation

Configuring a RIP Network (J-Web Procedure)

Copyright © 2010, Juniper Networks, Inc.
Monitoring OSPF Routing Information on page 1935
Layer 3 Protocols Supported on EX Series Switches on page 17
You can use the J-Web interface to create RIP networks.
To configure a RIP network:
Chapter 77: Configuring Layer 3 Protocols
Your Action
Click to add an import policy.
Add
Click Move up or Move down to move the selected policy
up or down the list of policies.
Click to remove an import policy.
Remove
Click to add an export policy.
Add
Click or to move the selected policy
Move up Move down
up or down the list of policies.
Click to remove an export policy.
Remove
Type or select and edit the name.
Type or select and edit the name.
Type or select and edit the name.
Select True to allow any user to read the file.
Select to disallow all users being able to read the
False
file.
Select a value from the list.
1917